FINISH OFF STRIPPER - 4L

Finish Off is a highly concentrated water soluble solvent stripper designed for speed stripping of floor finishes. It does not require machine scrubbing or neutralizing before applying floor finish, though both are recommended. It can be used with a scrubbing machine and will perform well as a heavy duty stripper in this type of application.

DIRECTIONS: For speed stripping, dilute the product with warm water.
Heavy build-up, use at 1:1
Medium build-up, use at 1:2
Light build-up, use at 1:4.

Mop-On Method:
Apply the diluted stripper to the floor with a clean mop. Allow 5 minutes contact time while mopping to provide agitation. Do not allow floor to dry during stripping operation. Pick up the solution thoroughly with a mop or vacuum. Rinse with clean water, and allow area to dry before applying new floor finish.

Machine Stripping Method:
For machine stripping, dilute the product with warm water at a rate of 1 part stripper to 4 parts water. Apply solution to floor with a clean mop. Allow approximately 5 minutes contact time. Do not allow floor to dry. Scrub area with a scrubbing machine, rinse well with clean water. Allow floor to dry before applying new finish.