DEEP FLOOR SCRUB - 4L

Deep Floor Scrub is designed to remove a minimum amount of floor finish layers in preparation before recoating with finish, eliminating the need for using traditional floor stripper. When used properly Deep Floor Scrub will leave you with a clean, freshly scrubbed surface that is ready for new floor finish to be applied.

Directions:
Dilute Deep Floor Scrub at 1:100 with cool water and apply a generous amount of solution to the floor using a mop & bucket or autoscrubber. Let solution work for 3 – 5 minutes
After contact time scrub with a floor machine or autoscrubber; a blue floor pad is recommended
Pick up solution using a mop, wet/dry vacuum or autoscrubber
Rinse floor using cool, clean water mixed with a neutralizer/conditioner product
Check floor to ensure all areas look clean and there is no shine remaining in any areas to be refinished, if there are shiny areas, repeat steps above
You are now ready to apply floor finish! 2 – 3 coats are recommended

NOTE: Do not allow Deep Floor Scrub solution to dry on the floor. Do not use Deep Floor Scrub as a daily floor cleaning chemical.